Dalian Longyao Plastic Machinery Co., Ltd.
Contacts:Manager Xu
Mob:13354065688
Tel:0411-86268088
0411-86268988
BM:0411-86265066
Web:m.jingduwang.cn
Email :xu86268088@126.com
Add:Lushun lime kiln, Dalian, Liaoning Province
Dalian Longyao Plastic Machinery Co., Ltd.
Contacts:Manager Xu
Mob:13354065688
Tel:0411-86268088
0411-86268988
BM:0411-86265066
Web:m.jingduwang.cn
Email :xu86268088@126.com
Add:Lushun lime kiln, Dalian, Liaoning Province
Causes of film bubble instability in film blowing machine
1) If the heating temperature of the machine is too high, the machine temperature should not be too high, which may also cause peculiar smell of the film.
2) If the film expansion ratio is too large, the expansion ratio should be kept within a reasonable range.
3) The extrusion amount of screw is too large, and the extrusion amount is directly related to the screw. The screw with appropriate length diameter ratio should be selected.
4) The cooling effect of the air ring is not good, and the cooling effect of the air ring directly affects the quality of the film.
5) The proportion of raw material formula is unreasonable
6) Due to the factors of the surrounding environment, it is also possible for the natural wind to blow the film.
Contacts:Manager Xu
Mob:13354065688
Tel:0411-86268088/0411-86268988
BM:0411-86265066
Web:m.jingduwang.cn
Email :xu86268088@126.com
Add:Lushun lime kiln, Dalian, Liaoning Province
Mobile station
Copyright ?Http://m.jingduwang.cn/En/ Dalian Longyao Plastic Machinery Co., Ltd Specializing inPE Film Blowing Machine,Three Layer Coextrusion Film Blowing Machine,ABA Film Blowing Machine, Welcome to inquire!
遼ICP備14017684號(hào) Powered By Xiangyun platform Technical support: joint enterprise Era