What are the features of the products blown out by ABA film blower

ABA film blower extruder, barrel and screw are made of high-quality alloy steel, tightened nitriding and precision processing, with more suitable hardness and corrosion resistance. The specially designed screw has a high yield and good plasticization. It is suitable for blowing plastic films such as low density polyethylene (HDPE), linear low density polyethylene (LLDPE), etc. It is widely used in civil and industrial packaging such as food, clothing, garbage bags, vest bags, etc.

In addition, the resin in the feeding section is continuously compressed and the air is discharged from the feeding section upside down. According to the different construction of film blower equipment, the price of high-quality film blower, the feeding spout does not need electric heating, and the operation steps of the film blower, but through the barrel heat transfer, the feeding spout temperature is about 50-90 degrees. In this way, the temperature of the feeding section is determined. In order to get a plastic bag product with controllable quality in the processing of film blower, it is necessary to control each processing link in place.

Generally, the processing process of the film blower consists of feeding heating, traction, and control of air pressure and edge closure. The size of the plastic bag is controlled by how much air is blown, and then it is stabilized by a membrane stabilizer.

Now the market lacks strict quality control, it is a lot of bad products flowing out. Many producers mix their eyes with the beads of inferior quality. We should be extra cautious when buying plastic film blowers. If we can not buy genuine machines, not only quality problems will cause frequent production quality accidents, but more importantly, work-related injuries will occur, threatening the safety of life and property. So the purchase of plastic film blowers is not a trifle.

When choosing plastic film blower, I will make a direct inspection myself, because it is not necessarily a small investment. Regular manufacturers will have free terminal services and accompany the explanations throughout. During the physical inspection, I can not only know the culture and production situation of the enterprise, but also remove the external objective impact by making effective judgment on the observation of the enterprise, which will greatly reduce the purchase risk.